X axis effective range: 850mm
Collection speed: 0-200mm/s
Positioning accuracy +/- 0.02mm
The diameter of the clamping roller: 1~10mm
Revolving speed: 0~300r/min, accuracy +/- 3%
 Electrospinning machine MF01-008 is an electrospinning equipment independently developed by our company. It is equipped with a large drum with a diameter of 300mm, which can make a large area of oriented fiber nanofiber membrane; it adopts 316 stainless steel nozzles and is equipped with dual sets of 32-needle special nozzles module,which greatly improves the spinning efficiency of the equipment; the temperature and humidity environment control system can effectively control the temperature and humidity of the spinning cavity and improve the spinning stability; the jet conjugate spinning can be used to prepare multi-material composite nanofiber membrane. |
(1). Equipped with conjugate multi-nozzle
(2). Equipped with high-speed big drum
(3). Temperature and humidity controllable
(4). Oriented nanofiber membrane can be prepared
(5). Composite nanofiber membrane can be prepared
Num | Item | Parameter | |
1 | Spinnable material | Most polymer solutions such as PVA, PCL, TPU, PEO, etc. | |
2 | High voltage power supply | 0～50kV，Tianjin Dongwen | |
| 0～-30kV，Tianjin Dongwen | |||
| Contains two sets of positive high voltages and one set of negative high voltages | |||
3 | Liquid supply system | Liquid supply system | 2 groups, one push two syringe pump |
| Applicable syringe specifications | 50、100、200ml | ||
| Liquid supply speed | 1~400ml/h | ||
| 2 groups of liquid supply pumps are independently controlled, which can realize different liquid supply speeds to control two groups of nozzle modules | |||
4 | Nozzle system | Adopt 32-needle trapezoidal array multi-nozzle, a total of 2*32 needles | |
| Two sets of spinning nozzle modules, each nozzle module 1*32 needles | |||
| Material used | 316 stainless steel | ||
| Reciprocating stroke of nozzle | ≤200mm | ||
| Spinning stroke | Maximum 600mm | ||
5 | Collection device | Adopt drum receiving method; (One set of drum) | |
| Drum specifications | φ300*600mm | ||
| Rotating speed | 1-3000r/min，Precision±1% | ||
| Material | 316 stainless steel | ||
6 | Temperature and humidity control system | Temperature control range | Room temperature -50℃ |
| Adjustable humidity control range | Room humidity -80% | ||
| Exhaust device | Maximum air volume 240m³/h | ||
7 | Touch screen | 7 Inch | |
8 | Equipment size | 1200（L）*950（W）*1600（H） | |
|
|
|
|
| Mask filter | Biomedicine | Artificial skin | New energy |
 |  |  |  |
| Sensor | Screen filter | National Defense Industry | Other |
